电动百叶窗阀门 大百叶阀 电动阀门

tjsb－0.5c百叶式手动气流调节器

blind manual air flow regulator

百叶式手动气流调节器是公司在引进日本技术的基础上，消化研制的一种新型节能的高效产品。适用于建材、玻璃、矿山、电力、轻工、造纸等行业的风机进口及通风管道，对管路中流量根据工况的不同需要进行调节。

the valve is the new type energy saving high efficient product designed on the base of introducing technology of japan. it is widely used at venting pipe and air-blower inlet in building material, glass, mining, power, light industry and papermaking departments. it adjusts flow in pipe by the different working conditions.

结构特点：

structure characteristic:

百叶式手动气流调节器设计新颖结构合理，调节板采用多叶、多轴式，使气流均匀分流，流阻小，启闭力矩小，动作灵活可靠，各传动部位采用润滑轴承，运转灵活，摩擦系数小调节轻松自如，能有效地控制气体流量，充分利用能源使工作系统达到状态，是各种风管系统中理想的气流调节设备。

the valve has the features of novel design and compact structure. its regulating disc adopts multi-blade and multi-axle, which can shunt airflow. flow resistance and open-close torque is little and operation is reliable. the lubricating bearing of transmission part is flexible on operation and handy of regulating with little coefficient of friction. it can control the airflow effectively and make the working system in optimal state by making full use of energy. it is the ideal airflow-regulating device in air piping system.

性能参数：

performance parameter:

型号说明：

model explanation:

tjsb---0.5c

我公司基本型

standard basic model of ourcompany

l        tjsb表示圆形手动调节器

l         tjsb means round manual regulator

使用说明、订货须知详见p137---138页：

using explanation and information for order is in page 137-138.

tjsb---0.5c外形图：

appearance figure:

tjsb---0.5c外形连接尺寸：

appearance joint dimensions:

工作原理：

working principle:

手动传动；由人工旋转蜗轮传动装置的手轮带动蜗轮副把动力传给连杆，通过摇杆带动各百叶轴使调节板同步旋转，达到全开、全闭及任意调节的目的。阀门的开启或关闭位置均由限位机构限位，并有指示机构显示蝶板位置状态。

the hand wheel of manual valve on the worm gear transmission device is rotated by hand to transport the power to the connecting shaft, drive the blind axle through the rocker to rotate the adjusting plate in order to open, close and adjust the valve freely. the open or close position of valve gate is limited by limiting device. the indicating device displays the position of butterfly disc.

自动传动；由自动装置的角位移带动传动轴，把动力传给连杆，通过摇杆带动各百叶轴使调节板作同步旋转，达到全开、全闭及任意调节的目的。自动装置与调节板的开度同步反馈4～20ma直流电信号，用户可根据电流信号来控制调节器的任意开度。

the angle displacement of automatic device drive the transmission shaft to transport the power to the connecting shaft, drive the blind axle through the rocker to rotate the adjusting plate in order to open, close and adjust the valve freely. the direct current signal4～20ma will be feed back by automatic device and adjusting plate. user can control the open angle of regulator freely according to the current signal.

安装及调试：

installation and regulation

l        安装前必须清洁调节器内腔，不允许有任何杂物和污垢附着。

l        安装前先手动启闭调节器一个周期，按客户工作系统要求对调节器做适当的调整（出厂时已作标准调整），运行无误后将调节器处于全闭状态再进行安装。

l        水平安装或垂直安装的阀门阀轴应处于水平位置，传动装置不允许作起吊用，并严禁损伤。

l        气流调节器为法兰式连接，安装时放置密封垫片（如示意图）然后均匀锁紧联接螺栓。

l        先调试手传动装置，运行无误后将调节板开启一个角度，再调试自动、电动部分。

l        根据自动执行机构控制原理调整反馈的电流信号。（详见其说明书）

l        调整完成后必须进行综合性能检查：接通电源开启阀门，当阀门至“全开”“全闭”位置时，行程控制机构应准确地切断电源，而转矩限位机构处于临界动作状态。开度指示机构应准确地显示阀门的开启状态。

l        若传动装置配备手动，手动与电动机构转换时，应切断电源。

l         the body must be cleaned before installed and there is no dirt and sundries clinging to the body.

l         trial operation of valve should be done before install. open and close the valve by hand for a period. adjust the regulator according to the working system condition of user. install the valve in full close state when there is no mistake.

l         the valve axle must be on the horizontal position when installed in horizontal or vertical. the transmission device cannot be hoisted and avoid damage when installed.

l         pneumatic regulator is connected by flange. add sealing shim when install and then lock down the connection bolt.

l         debug the manual device. open a angle after there is no mistake, and then debug automatic or electric parts.

l         adjust the feedback of current sign according to the automatic actuator device control principle, which is detailed in specification.

l         synthetic performance of the valve must be done after adjust is over: turn on the power and open the valve, the stroke control device should cut down the power exactly when the valve is in the state of full open or full close. while the torque limit device is in critical state. the open angle indicating device should display the open state of the valve gate exactly.

l         cut down the power when the manual and electric device is switched.

运输及保管：

transportation and protection

l        运输时应避免撞击阀门及传动装置，阀门应处于全闭位置，以防在运输中板和传动部件损坏。

l        当阀门水平放置运输时传动装置及传动部位应悬空，以防止传动轴受力过大变形损坏。

l        传动装置及传动部位应作防潮、防雨处理。

l        阀门应存放在干燥的室内，不允许露天存放或堆置。

l        阀门长期存放时应使设备处于关闭状态，各传动部位加润滑油。传动装置作防潮、防尘处理。

l         avoid bumping of the valve and transmission device. the valve is in full close in order to avoid damage of disc and driving part.

l         transmission device and part should be hung up when the valve is in horizontal in order to prevent damage of axle.

l         treatment of dampproof and rainproof should be done to transmission device and part.

l         the valve should be stored in dry room and should not be piled up in open air.

l         it should be in full close state when long stored. add lubrication to the transmission part and the device should be dampproof and dustproof.

维护及检修：

maintenance and examination

l        定期检查传动装置的运行情况：电机部分、控制开关是否异常。

l        定期给阀的传动部位加润滑油。

l        定期检查阀的密封填料处，补充、更换填料以防介质外泄。

l        对阀门周期性维护时应全面检查阀的各密封部位、传动部位，对各密封部位应进行检测，对检测数据应记录在案。

l         check the working condition of electric motor parts, control switch and sealing of pneumatic device regularly.

l         add lubricant to the transmission parts regularly.

l         check the sealing filler of the valve regularly. complement or change filler avoiding leakage of medium.

l         check the sealing parts and transmission partsthoroughly. detect the sealing parts and the detecting data should be registered.

订货须知：

information for order

l        选用订货时，请参照产品样本注明产品规格、型号、客户选用执行器代号及技术参数（使用温度、设备工况、介质性质等）。

l        选用订货时，若未注明客户选用传动装置代号的按我公司基本型配置，其基本型为普通型装置，不带任何有关特殊要求及相关配件。基本的传动装置、电气装置为普通型，如有其他特殊要求（户外、微控、防爆等）请在合同中注明。与风机配套请提供风机型号和连接尺寸。

l        表中未列的规格、用于特殊介质或其它特殊要求，请与我公司经销部、技术部联系，可为您另行设计、制造。

l         please indicate the type, model and technical parameter (using temperature, working condition of e and characteristic of medium etc) referring to the product sample when you place an order.

l         if you don’t indicate actuator code selected by user when you place an order, we will select the basic collocation of our company for you. the basic type is a normal type without any special request and corresponding accessory. the basic transmission device and electricity device is normal type. if you have especial demand (anti-explosion, outdoors and micro control etc), please indicate in the contract. it the valve is e with wind blower, please offer the type and connecting dimension of the wind blower.

l         if you have other special demand, need special medium or the data that is not listed in the table, please contact with our department of market and technology. we can design and manufacture for you especially.

本产品的介质温度是300（℃），工作压差是常压，材质是碳钢，品牌是湖北澳星，型号是TJSB－0.5C，产品别名是百叶窗阀门，适用范围是空气、粉尘气体等，连接形式是法兰，类型(通道位置)是二通式，流动方向是单向，驱动方式是手动，用途是调节,调压，适用介质是空气、粉尘气体等，压力环境是0.05MPa，标准是国标，密封形式是硬密封型，工作温度是≤300